Standard grade model. Cost reduction has been achieved through the technical capabilities of an engineer familiar with the characteristics of different materials.
- The arm pipe and vertical shaft parts (which greatly influence sound quality) are made from stainless steel.
- Along the main conduction tube we have reproduced a material close to stainless steel supplement, using brass with a tough chrome plating
- The fulcrum is strongly supported with radial bearings
- The inside force canceler is insulated with ABS resin, and reduces reverberation distortion
|Total Length (*1)||252mm||290mm|
|Effective Length (*2)||229mm||254mm|
|Practical Length (*3)||214mm||239mm|
|Offset Angle||23 °||22 °|
|Adaptable cartridge weight(incl headshell）||11～28g||11～29g|
|Tracking weight range||0.25g (Minimum scale) – over 6g (3g/360 °rotation)|
|Adjustable height (*4)||41mm～|
|Shaft dimensions to mounting base||16mmΦ|
|Mounting hole size||24mmΦ|
|Fixing depth size||Up to 20mmt (Another size is available)|
(*1) : From counter weight shaft end headshell terminal.
(*2) : From centre of tonearm Base to stylus tip.
(*3) : From centre of tonearm Base to centre of turntable)
(*4) : From plinth surface to horizontal height of arm tube