BASE
●24mm dia. base
MH-B244S
Installation hole size φ25mm ｜ Installation board thickness 〜20mm ｜ Material – stainless-steel
Drill a hole in the base plate and attach it to the board using screws. It is not necessary to use the nut.
●Deep hole・24mm dia. base
MH-B244LS
Installation hole size φ25mm ｜ Installation board thickness 〜40mm ｜ Material – stainless-steel
●Deep hole・30mm dia. base
MH-B304LS
Installation hole size φ31mm ｜ Installation board thickness 〜40mm ｜ Material – stainless-steel
PLATE
●Option base plate to attach to SME Plate for trial listening
MH-SME30
Material – stainless-steel ｜ hole size:30φ
NOTE:The hole width of SEM mounting plate depends on the player. If the hole width size is less than 35mm, the nut will not fit and it cannot be installed.
MH-SME16S
Material – stainless-steel ｜ hole size:30φ
A dedicated base that can be attached to the SME mounting base. The base attached to the tonearm is not used. It can be installed without worrying about the size of the hole width. The position can be adjusted by ±5mm.
●Luxman PD-191A
MH-12S191A
Material – stainless-steel ｜ hole size:30φ
●Technics SL-1000R
MH-10S1000R（for 10 inch arm：the middle hole） | MH-12S1000R（for 12inch arm：the top hole）
Material – stainless-steel ｜ weight:1.7kg(MH-10S1000R) / 1.8kg(MH-124S1000R) ｜hole size:30φ
●Technics SH10B3（SP-10mk3）
MH-SH10B3
size:171mm x 124mm ｜thickness:20mmt ｜ Material – stainless-steel ｜ weight:2.5kg
●TRANSROTOR tourbillion
MH-124STOB
size:172mm x 118mm ｜ thickness:20mmt ｜ Material – stainless-steel ｜ weight:2.1kg
●TRANSROTOR ZET3
MH-124SZET3(MH-124S, 12 inch)
size:196mm x 108mm ｜ thickness:20mmt ｜ Material – stainless-steel ｜ weight:2.3kg
MH-10SZ3(MH-104S, 10 inch) / 9SZ3(MH-94S, 9 inch)
Material – stainless-steel ｜ weight:1.6kg ｜ Φ30
●TRANSROTOR ZET3 plate set
MH-124SZET3A
Package : MH-124SZET3 plate, lower plate:Φ118mm x 10mmt, brace:Φ18 x t45mm x 5 and mut｜ weight:total 3.6kg
MH-12SDQX(MH-1200S, 12 inch) / 9/10SDQX(MH-900S, 9 inch / MH-1000S, 10inch)
Material – stainless-steel
●Clearaudio Ovation
MH-94SCLOV
size:Φ85mm｜ thickness:t20mm（14）｜ Material – stainless-steel ｜ weight:1.0kg
●ortofon solid Machine
MH-94SSM
size:Φ100mm｜ thickness:14mmt ｜ Material – stainless-steel ｜ weight:1,040g
●DARK STAR 用 MH-94S *build to order manufacturing
Arm Resting Device
●MH-R4S Material – stainless-steel
●MH-RO4S Material – stainless-steel
Arm Lifting Device
●MH-L4S Material – stainless-steel
Headshell
●MH-4S
Material: Integral shell and plug of machined stainless steel | Leadwire: Stranded OFC | Mass: 12g（including leadwires and screws） | Mounting Screws:stainless steel 2.6mm dia. x16mm x 2pcs. / stainless steel 2.6mm dia. x12mm x 2pcs. / stainless steel nut 2.6mm dia. x 2pcs.
Flutter
●MH-T310S
Material – stainless-steel ｜ thickness：1cm ｜ diameter：30cm ｜ weight:5.4kg
please note motor torque and strength of mandrel due to high weight and mandrel length is more 14mm.